Structure

The tensile body is made of:

✓ High-strength
✓ Low elongation galvanised steel wire rope
✓ Compounded with flame-retardant
✓ Anti-static high-quality cover rubber materials both above and below.

Under constant tension, after bonding and vulcanization, it is able to meet the requirements for flame-retardant and anti-static material conveying in underground coal mines.

Applications

Suitable for use in flame-retardant and anti-static environments in underground coal mines.

It features:
✓ Flame-retardant
✓ Anti-static properties
✓ High tensile strength
✓ Long lifespan
✓ Low elongation
✓ Good groove-forming ability
✓ Excellent flexibility
✓ Suitable for long-distance
✓ Large-span
✓ High-capacity
✓ high-speed material transportation.

Strength Specifications

630N/mm-5400N/mm

Width Specifications

800mm-2200mm

Safety Performance

During the drum friction test, no flaming combustion or non-flaming combustion shall occur at any part of each sample, and the surface temperature of the drum shall not exceed 325℃.

For 6 intact cover layer samples, the arithmetic mean of the flaming combustion time and non-flaming combustion time for all samples after the torch is removed shall not exceed 3.0 seconds, and the single value of flaming combustion time and non-flaming combustion time for each sample shall not exceed 10.0 seconds. For 6 stripped cover layer samples, the arithmetic mean of the flaming combustion time and non-flaming combustion time for all samples after the torch is removed shall not exceed 5.0 seconds, and the single value of flaming combustion time and non-flaming combustion time for each sample shall not exceed 15.0 seconds.

The undamaged length retained across the full width shall be greater than 600mm.

The arithmetic mean of the surface resistance values on the upper and lower surfaces of the sample shall not exceed 3.0 X 1080.

Get in touch today

Let’s Talk

continue reading

Related Posts